COLORMAKER PATINAETCH is a mildly acidic water based solution designed to etch and stain concrete or masonry substrates. The chemical reaction with the substrate results in naturally variegated earth tones similar to the oxidation of a copper roof or the patina of a bronze sculpture. COVERAGE:  approx 150-300sf per gallon at full strength

INCRETE STAIN-CRETE is a permanent stain that creates beautiful color tones in existing concrete. It is deep penetrating, chemical stain. It chemically reacts with cured concrete to provide distinctive, permanent color with a subtly shaded marbled effect, similar to the aged appearance of natural stone.

BRICKFORM BLUSH-TONE ACID STAIN is a chemical stain designed to add multi-colored intensities to existing or overlay surfaces. It is engineered to produce oxide colors on cured concrete surface through a chemical reaction with a free lime at the surface. COVERAGE: approx 200-300sf per gallon

DYES

COLOMAKER DECOGRAPHIC DYE concentrates are high strength solutions of primary colors intended to make ready-to-use dye stains by blending to the desired color and reducing with lacquer thinners. It may be applied as the primary colorant or as a secondary treatment over Patinaetch or Colorfast.  Decographic Dyes are not recommended for exterior used and must be top coated with one of the COLOMAKERS clear floor sealers. COVERAGE: approx 1000sf per gallon diluted at 1:5 ratio with acetone.

COLORMAKER SOMERU DYE  is a water-based formula of transparent pigment used for coloring hardened concrete surfaces and toppings or for enhancing acid stained floors. Patinaetch can be used in conjunction with Someru Dyes. Patinaetch must be used before over-dyeing with Someru dyes.